ACETIC SILICONE

Descrição do produto

It is a one-component sealing adhesive available in an acetic-curing version, which seals and dries in contact with moisture in the air, transforming it into a tough, flexible rubber. They have an exclusive sealing function and should not be applied in structural glues.

SPECIFICATIONS

Fast film formation;
Cure speed of 2 mm/24 h;
Resistant to UV rays;
Permanent elasticity;
Available in white and transparent versions;
280 ml packs for use with 300 ml applicator

ASSEMBLY EXAMPLES

Indicated for application in sealing systems, such as glass, frames, aluminum, floors, and tiles, in the case of Acetic Cured Silicone;

Not suitable for structural bonding, such as fixing glass plates on building facades.

APLICATIONS

Suitable for sealing glass, frames, aluminum, floors, and tiles. Not suitable for aquariums, laminated glass, wood, ferrous metals (even galvanized), natural stones, painted surfaces and food contact;

ASSEMBLY INSTRUCTIONS

Image01: Application method 1 Apply masking tape on the sides of the surface, to delimit the area where the product will be applied;

Image02: 2 Cut the end of the tube and thread the applicator nozzle. Cut the tip of the applicator nozzle at 45° and place the tube in the dispenser;

Image03: 3 Apply silicone along the entire surface;

Image04: 4 Finish with a spatula. Finishing the job, remove the masking tape and keep the applicator nozzle in the tube until the next application, when it should be removed and cleaned.