The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3/4 ″ (Inch), M10 and M12 (Metric).
| Code | Description | Thread diameter | Anchor outer diameter | Thread length | Anchor length | Tensile medium loads (pullout) |
| A | B | C | D | kgf | ||
| in | mm | mm | mm | |||
| 470670 | WRS 1/4″ | 1/4″ | 11 | 12 | 31 | 1725 |
| 470671 | WRS 5/16″ | 5/16″ | 12,7 | 14 | 35 | 2395 |
| 470672 | WRS 3/8″ | 3/8″ | 14 | 15 | 38 | 3336 |
| 470673 | WRS 1/2″ UNC | 1/2″ | 18 | 20 | 52 | 4740 |
| 470674 | WRS 1/2″ WW | 1/2″ | 18 | 20 | 52 | 4740 |
| 470675 | WRS 5/8″ | 5/8″ | 21,5 | 22 | 62 | 5785 |
| 470676 | WRS 3/4″ | 3/4″ | 25 | 31 | 82 | 8160 |
Values considered for application in 20 MPa concrete.
Image01: 1 Drill the hole with the indicated diameter and depth;
Image02: 2 Clean it thoroughly with a blower;
Image03: 3 Tap until the face of the anchor lines up with the concrete;
Image04: 4 Proceed with fixing.
Concrete
Hollow Block
Rock
Drywall
Cement Board
Wall Panel
Wood
OSB
Structural Steel
Metal Tile
Aluminum
Guides and amounts
