The CBE and CBEPL anchors (with extender) are mechanical torque expansion anchors, supplied with threaded stud, washer, jacket and cone. Due to its threaded stud, it becomes one of the ideal anchors for fastening façades and Walsywa has one range of diameters ranging from 1/4″ to 1″.
The CBOLT Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it is re-applicable. Walsywa supplies this anchor with diameters ranging from 6mm to 12mm.
The CB Closed hook anchor is a torque expansion anchor, mainly indicated for fastening protection screens on facades. Walsywa supplies this anchor in 1/4″ diameter.
The Concrete Bolt Anchor is an interlocking anchor, that is, the locking in concrete is carried out by the thread itself, it is also known as a concrete screw and because it is re-applicable. Walsywa supplies this anchor with the Ruspert organometallic finish, and with diameters that range from 1/4″ to 3/8″. Other posts of interest. Concrete Show 2019
The Fast Bolt Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it can be reapplied. Fast Bolt is ideal for electrical suspensions and piping. Walsywa supplies this anchor with 1/4″ and 3/8″ internal diameters.
The Metal Impact Anchor is a percussion expansion anchor, ideal for light fastenings to concrete. Walsywa supplies this anchor in 3/16″ and 1/4″ diameters.
The URW Anchor is a percussion expansion anchor, for its application it is necessary to use the URW/WRS Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3 /4″ (Inch) and M8 to M12 (Metric).
The WB Anchor is a mechanical torque expansion anchor, which at the end of the rod has a flat head that allows it to be hammered in to easily embed at the time of application, supplied with a threaded body, nut, washer and clamp, Walsywa has a range of diameters ranging from 1/4″ to 1″.
The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3/4 ″ (Inch), M10 and M12 (Metric).
The WRS Anchor is a percussion expansion anchor, for its application it is necessary to use the URW/WRS Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3 /4″.
The CB Anchor, a mechanical torque expansion anchor, is also supplied with the jacket and cone separately, to be used with threaded bars or screws of your choice, Walsywa has a range of diameters ranging from 1/4″ to 1″.
The CB Anchor is a mechanical torque expansion anchor, the extender is also supplied separately, to be used mainly when you have the need to increase the anchor inlay and gain greater resistance in tensile loads, Walsywa has a range of diameters for anchor bolts ranging from 1/4″ to 1″.
The CB and CBPL anchors (with extender) are mechanical torque expansion anchors, supplied with a screw, washer, jacket and cone, these are the best-known anchors on the market and Walsywa has a range of diameters ranging from 1/ 4″ to 1″.
The Blue Bolt Anchor is an interlocking anchor, that is, the locking in concrete is carried out by the thread itself, it is also known as a concrete screw and because it is re-applicable. The Blue Bolt is ideal for light fixtures. Walsywa supplies this anchor in 3/16″ and 1/4″ diameters.
The Alpha Anchor is a torque expansion anchor, ideal for through assemblies, where the anchor needs to pass through the hole of the part to be fixed before the final torque. Walsywa supplies this anchor in diameter from 3/16″ to 5/8″.
The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. Walsywa supplies this Beater in diameters from 1/4″ to 3/4″.
The URW and WRS Anchor bolts are expansion bolts by percussion, for their application it is necessary to use the URW/WRS Threaded Beater. Walsywa supplies this Beater in diameters from 1/4″ to 3/4″.