Indicated for cutting drywall profiles and uprights, profiles up to 0.7mm.
Categoria: Drywall Fastening System
Indicated for straight or rounded cuts on the left in sheet metal or profiles and uprights of drywall and steel frame.
Indicated for straight or rounded cuts on the right in sheet metal or profiles and uprights of drywall and steel frame.
The Waltex mesh is a mesh composed of interwoven fiberglass threads, with high resistance to alkalinity, it is intended to reinforce the facade of cement plates, allowing the application of mass (base coat) under its surface. Walsywa Provides Waltex mesh 1m wide by 50m long.
Accessory designed to make the transport of different plates of up to 80 kg in dry construction works more ergonomic.
1/4” hex socket used on drywall screwdrivers.
Medium sized saw with double serrated blade, ergonomic handle and tip that helps in the perforation of plaster or drywall boards, facilitating the work when it is necessary to start a cut in the middle of the board.
The Compass Saw is an ideal accessory for cutting plaster boards with a thick blade and metal profiles with a thin blade.
Manual tool for making cylindrical holes in metal profiles (drywall mounts) for the passage of electrical or hydraulic ducts in measures of 22, 28 and 34 mm.
Accessory used for carrying and easy access to screws, pins and rivets when carrying out work in high places.
The Mechanical Stilts is a tool that allows you to carry out work at heights, without the need for ladders and scaffolding, giving your work more productivity.
The Lentil Head Steel Frame Screw, known as metal-metal screw, is intended for fixing sheet metal to thin steel profiles or for fixing profiles to each other in the light steel frame constructive system (Guides and Mounts up to 2mm thick). Walsywa supplies this screw in glossy zinc plated and organometallic dacromet versions.
Walwrap Hydrophobic Membrane is applied on external walls in light steel frame and wood frame constructions, to act as a barrier against wind, dust, water vapor and heat. Allows the exit of water vapor from the interior of the walls, preventing the accumulation of moisture and the proliferation of fungi.
The grater is a practical accessory for trimming the edges of Drywall boards.
Waltape Tape Plus is a screened tape composed of intertwined fiberglass strands (forming a mesh), with one of the self-adhesive sides, intended for the treatment of joints between Drywall boards on walls or ceilings. Due to its 9×9 mesh, it allows for better adhesiveness. Walsywa supplies Waltape plus in 45m and 100m long rolls.
Waltape Tape is a screened tape composed of intertwined fiberglass threads (forming a mesh), with one of the self-adhesive sides, intended for the treatment of joints between Drywall boards on walls or ceilings. Walsywa supplies Waltape in lengths of 45 or 90 meters.
Waltape Tape is a screened tape composed of intertwined fiberglass threads (forming a mesh), with one of the self-adhesive sides, intended for the treatment of joints between Drywall boards on walls or ceilings. Walsywa supplies Waltape with a centering line, which allows a better distribution of the tape between the board joints, avoiding errors by application, with lengths of 90 meters.
Waltape Cement Tape is a screened tape composed of intertwined fiberglass threads (forming a mesh), with a self-adhesive side, intended for the treatment of joints between cement boards on walls. Walsywa supplies Waltape Cement tape in 51mm or 102mm rolls.
The Walpaper Tape is a microporous and microperforated paper tape that facilitates the exit of air, preventing the formation of bubbles. It is intended for treating joints between drywall boards on walls or ceilings. Walsywa supplies the 150m long Walpaper tape.
Modified asphalt adhesive tape that, together with the LP Membrana, acts as a barrier against heat and water vapor and guarantees the sealing and tightness of the interface between the subsystems (walls-frames, walls-foundation). Used in conjunction with the Walwrap waterproof Membrane, allowing for a better seal.
Walcorner Tape is a microporous paper tape with stainless metal inserts close to the central strip, intended to protect against breakage and chipping in outer corners. Walsywa supplies the 30m long Walcorner tape.
Walsywa Double Sided Adhesive Tape is used to splice, fix, assemble and glue various types of objects and surfaces. This way it can have the effect of sticking permanently or repositionable (glue and peel without leaving residues). Walsywa Double Sided Adhesive Tape is ideal for light steel frame constructions, being used to fix the Walwrap Hydrophobic Membrane, in advance of the cementitious plate.
The Drywall Plate Lift is a tool that allows you to suspend drywall plates without the need for a helper or excessive physical effort that can cause fatigue.
This unique set replaces a series of hole saws for the execution of circular holes in plates, as it has different measures adjustment. This accessory has an SDS fitting to be used with drills and hammer drills.
The Chamfer tool is an accessory used to make chamfers on the sides of plasterboards. Greater precision in finishing.
Bit Philips #2 of 25 or 50 mm, indicated for use with screwdrivers.
25 mm bit Philips #2 with plastic stop, suitable for use with screwdrivers without this feature.
Ideal to facilitate and improve the quality of application of screen tapes in flat joints or corners.
To fasten the guide to the support, both made of drywall, with ergonomic handle and spring return that provides more flexibility in the work.
Used to correct the support guide, both drywalls. No screws needed.
Walsywa Nickel Plated Nails are made of tempered and tempered carbon steel with a nickel-plated finish that is highly resistant to corrosion.
Walsywa Golden Zinc-plated Nail are highly resistant to oxidation due to their golden zinc finish, being tempered and tempered.
The Steel Frame Hex Head Screw is ideal for building scissors with metal profiles. Walsywa supplies this screw with a bright zinc plated or dacromet organometallic finish, superb #8 and #10 threads.
The LSF screw cementitious plate is intended for fixing cementitious plates to metal profiles in Light Steel Frame constructions. Walsywa supplies this screw in dacromet gloss zinc or organometallic finishes, superb #8 and #10 threads and thread protection fins.
The Screw Panel Wall is intended for fixing wall panels in metal profiles, ideal for Light Steel Frame constructions. Walsywa supplies this screw in a phosphate finish, superb #12 thread and thread protection fins.
The LSF screw for OSB board is intended for fixing OSB boards to metal profiles in Light Steel Frame constructions. Walsywa supplies this screw in gloss zinc plated or dacromet organometallic finishes and superb #8 and #10 threads.
Trumpet Head Screw, known as GN is intended for fixing plasterboard sheets in thin steel profiles (Guides and Mounts). Walsywa supplies this screw in needle point and sharp point versions, with a phosphate finish.
The Pan Head Screw, known as the “bean” screw, is intended for fixing metal sheets in thin steel profiles or fixing profiles to each other (Guides and Mounts). Walsywa supplies this screw in needle point and drill point versions, with a phosphate finish.
The Lentil Head Screw, known as metal-to-metal screw, is intended for fixing sheet metal to thin steel profiles, or fixing profiles to each other (Guides and Mounts). Walsywa supplies this screw in needle point and drill point versions.
The Flanged Flat Head Chipboard Screw is intended for fixing light objects on a soft base, such as wood, OSB, drywall, among others. Walsywa supplies this screw in a bichromated finish and in diameters from 4mm to 6mm.
The Flat Head Chipboard Screw is intended for fixing light objects on a soft base, such as wood, OSB, drywall, among others. Walsywa supplies this screw in a bichromated finish and in diameters from 4mm to 6mm.
Productivity, robustness, and practicality! You will find all of this in the new Bosch GTB 650 Screwdriver with depth stop. A tool developed to combine power and efficiency in just one product, it has a 650-w engine, 5,000 rpm and 12 Nm torque. Easy to carry as it has a belt clip with a central slit allowing transport to anywhere, in addition to having a slim body that allows for a more comfortable grip, it has the Softgrip system enhancing even more comfort during work, making ergonomics a key feature with the GTB 650.
Waltog Fixing is a bushing intended for light anchors (such as lighting fixtures, frames, and panels) in drywall boards and plaster ceilings. Walsywa supplies the Waltog fixing together with the screw.
The Walgips Fixing is intended for light anchorages directly on Drywall plates, ideal for fixing decorative elements.
The Snaptoggle Fixing is a bushing designed for hollow materials, ideal for fixation on lighting fixtures, fans, sinks, fire extinguishers, etc., on drywall boards or hollow concrete blocks. Walsywa supplies the Snaptoggle fixing in 6mm to 3/ 8″.
The PE Hollow Plug is intended for fixings in hollow and diverse materials, such as plasterboard or other materials with more than 6 mm thick. Walsywa supplies the PE hollow fixing in 6mm to 10mm measurements.
The MP-X Fixing a universal fixing, intended for fastening in hollow materials, solids, and Drywall plates. Ideal for fixing facades, air conditioning, frames, grilles, among others. Walsywa supplies the MU-X fixing together with the screw or stud, available in 8mm and 10mm sizes.
The MP Fixing a universal fixing, intended for fastening in hollow materials, solids, and Drywall plates. Walsywa supplies the MP fixing in 8mm to 14mm measurements.
The FU Plug is intended for fixings in hollow and diverse materials, such as plasterboard or other materials with more than 6 mm thick. Walsywa supplies the FU plug in 6mm to 10mm measurements.