The CBE and CBEPL anchors (with extender) are mechanical torque expansion anchors, supplied with threaded stud, washer, jacket and cone. Due to its threaded stud, it becomes one of the ideal anchors for fastening façades and Walsywa has one range of diameters ranging from 1/4″ to 1″.
The CBOLT Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it is re-applicable. Walsywa supplies this anchor with diameters ranging from 6mm to 12mm.
The CB Closed hook anchor is a torque expansion anchor, mainly indicated for fastening protection screens on facades. Walsywa supplies this anchor in 1/4″ diameter.
The Concrete Bolt Anchor is an interlocking anchor, that is, the locking in concrete is carried out by the thread itself, it is also known as a concrete screw and because it is re-applicable. Walsywa supplies this anchor with the Ruspert organometallic finish, and with diameters that range from 1/4″ to 3/8″. Other posts of interest. Concrete Show 2019
The Fast Bolt Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it can be reapplied. Fast Bolt is ideal for electrical suspensions and piping. Walsywa supplies this anchor with 1/4″ and 3/8″ internal diameters.
The Metal Impact Anchor is a percussion expansion anchor, ideal for light fastenings to concrete. Walsywa supplies this anchor in 3/16″ and 1/4″ diameters.
The URW Anchor is a percussion expansion anchor, for its application it is necessary to use the URW/WRS Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3 /4″ (Inch) and M8 to M12 (Metric).
The WB Anchor is a mechanical torque expansion anchor, which at the end of the rod has a flat head that allows it to be hammered in to easily embed at the time of application, supplied with a threaded body, nut, washer and clamp, Walsywa has a range of diameters ranging from 1/4″ to 1″.
The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3/4 ″ (Inch), M10 and M12 (Metric).
The WRS Anchor is a percussion expansion anchor, for its application it is necessary to use the URW/WRS Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3 /4″.
Ceramic Crowns play a fundamental role in containing the arc formed when welding the Stud Bolt Walsywa Connector Pin. Both versions, for Metal Base or for Steel Deck, guarantee a wide range of possibilities and applications.
The CB Anchor, a mechanical torque expansion anchor, is also supplied with the jacket and cone separately, to be used with threaded bars or screws of your choice, Walsywa has a range of diameters ranging from 1/4″ to 1″.
Joints for joining threaded bars, ideal for suspended fixings.
Walsywa supplies the joints with 1/4″ to 3/8″ threads.
The Walsywa Stud Bolt shear connector pin is produced in accordance with the AWS D1.1 international standard. Practical, safe, and agile, it is essential in the integration between mixed steel-concrete structures such as “Steel Deck” slabs, absorbing and transferring part of the shear efforts to the steel structure of the project.
The CB Anchor is a mechanical torque expansion anchor, the extender is also supplied separately, to be used mainly when you have the need to increase the anchor inlay and gain greater resistance in tensile loads, Walsywa has a range of diameters for anchor bolts ranging from 1/4″ to 1″.
The Walsywa Lock Bracket is a product intended for the suspension of hydraulic pipes. Its innovative system dispenses with the use of wrenches, nuts, and washers for fastening to threaded bars, as it has an exclusive locking system that ensures firm fastening and quick application.
The CB and CBPL anchors (with extender) are mechanical torque expansion anchors, supplied with a screw, washer, jacket and cone, these are the best-known anchors on the market and Walsywa has a range of diameters ranging from 1/ 4″ to 1″.
The Blue Bolt Anchor is an interlocking anchor, that is, the locking in concrete is carried out by the thread itself, it is also known as a concrete screw and because it is re-applicable. The Blue Bolt is ideal for light fixtures. Walsywa supplies this anchor in 3/16″ and 1/4″ diameters.
The Alpha Anchor is a torque expansion anchor, ideal for through assemblies, where the anchor needs to pass through the hole of the part to be fixed before the final torque. Walsywa supplies this anchor in diameter from 3/16″ to 5/8″.
The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. Walsywa supplies this Beater in diameters from 1/4″ to 3/4″.
The URW and WRS Anchor bolts are expansion bolts by percussion, for their application it is necessary to use the URW/WRS Threaded Beater. Walsywa supplies this Beater in diameters from 1/4″ to 3/4″.
Accessories used to carry out suspensions of light, medium and heavy tubes, or ducts together with perforated or engraved tapes.
Walsywa Nickel Plated Nails are made of tempered and tempered carbon steel with a nickel-plated finish that is highly resistant to corrosion.
Walsywa Golden Zinc-plated Nail are highly resistant to oxidation due to their golden zinc finish, being tempered and tempered.
The Dacromet Organometallic Tile Screw is intended for fixing between metallic tiles and purlins in the roof of buildings in general, ideal for fixing in coastal regions. Walsywa supplies this screw with an organometallic dacromet finish, in Tile-Tie and Tile-Tile (Sewing) versions, with a range of lengths ranging from 19mm to 76mm and diameters of 5.5mm and 6.1mm.
The Dacromet Organometallic Tile Screw is intended for fixing between metallic tiles and purlins on the roof of buildings in general, ideal for fixings in coastal regions or that require high durability against corrosion.
The Self Drilling Tile Screw is intended for fixing between metallic tiles and purlins in the roofing of constructions in general. Walsywa supplies this screw with a shiny zinc finish, in the Tile-Tie and Tile-Tile (Sewing) versions, with a range of lengths that range from 19mm to 76mm and diameters of 5.5mm and 6.1mm.
The Walsywa Nylon Fixing is the best-known bushing on the market, indicated for various fastenings in solid materials.
Suspension system for light, medium and heavy tubes or ducts, ideal for any shape and any height. Walsywa supplies Perforated Tape and Eraflex Tape for the piping suspension system.
Other posts of your interest…
RFS System: What’s the difference between it and the system…
Hex nut, used with screws, threaded rods and studs. It has a glossy zinc finish.
Walsywa supplies the hex nut with thread diameters from 1/4″ to 3/4″.
SDS Plus Drill Bits offer durability for drilling concrete. The spiral design provides effective and more resistant dust removal.
The Threaded Bars are ideal for suspensions of luminaires, fans, hydraulic piping, cable trays and others, they have a glossy zinc plated surface finish or an oiled polish. Walsywa supplies the threaded bars in both metric and inch diameters.
Flat Washer is used in conjunction with screws, threaded bars, stud and nuts. It has a glossy zinc finish.
Walsywa supplies this washer in metric and inch measurements.