The INOX blind rivet is inserted into the hole where the pieces are joined, using a manual rivet. Walsywa supplies this rivet in different sizes that vary.
Categoria: Winox Fastening
The CB Anchor is a mechanical torque expansion anchor, the extender is also supplied separately, to be used mainly when you have the need to increase the anchor inlay and gain greater resistance in tensile loads, Walsywa has a range of diameters for anchor bolts ranging from 1/4″ to 5/8″.
The CB Anchor, a mechanical torque expansion anchor, is also supplied with the jacket and cone separately, to be used with threaded bars or screws of your choice, Walsywa has a range of diameters ranging from 1/4″ to 5/8″.
The WB Anchor is a mechanical torque expansion anchor, which at the end of the rod has a flat head that allows it to be hammered in to easily embed at the time of application, supplied with a threaded body, nut, washer and clamp, Walsywa has a range of diameters ranging from 1/4″ to 3/4″.
The CBE and CBEPL anchors (with extender) are mechanical torque expansion anchors, supplied with threaded stud, washer, jacket, and cone. Due to its threaded stud, it becomes one of the ideal anchors for fastening facades and Walsywa has one range of diameters ranging from 1/4″ to 3/8″.
The CB and CBPL anchors (with extender) are mechanical torque expansion anchors, supplied with a screw, washer, jacket and cone, these are the best-known anchors on the market and Walsywa has a range of diameters ranging from 1/ 4″ to 3/8″.
Partial Thread Hex Screw to be used in conjunction with nuts and washers of the same material type. Walsywa supplies this bolt with diameters from 1/4″ to 5/8″
Hex Bolt to be used in conjunction with nuts and washers of the same material type. Walsywa supplies this bolt with diameters from 1/4″ to 3/4″.
Hex Bolt to be used in conjunction with nuts and washers of the same material type. Walsywa supplies this bolt with diameters from M6 to M20
The self-tapping Phillips pan head screw has a thinner and sharper thread that makes it “grip” with more force in the hole. Ideal for applications in chemical industries or coastal regions, used in conjunction with dowels or directly on wood.
The self-tapping pan head screw has a thinner and cutting thread that makes it “grip” with more force in the hole. Ideal for applications in chemical industries or coastal regions, used in conjunction with dowels or directly on wood.
Partial Thread Cylindrical Screw to be used in conjunction with nuts and washers of the same material type. Walsywa supplies this bolt with diameters from M6 to M10.
Cylindrical screw to be used in conjunction with nuts and washers of the same material type. Walsywa supplies this bolt with diameters from M5 to M10.
The self-tapping flat head Phillips screw has a thinner and cutting thread that makes it “grip” with more force in the hole. Ideal for applications in chemical industries or coastal regions, used in conjunction with bushings or directly on wood.
The self-tapping flat head screw has a thinner and cutting thread that makes it “grip” with more force in the hole. Ideal for applications in chemical industries or coastal regions, used in conjunction with bushings or directly on wood.
Set consisting of threaded rod, nuts and sealing washer. Used in assembling the structures of the solar panels to be fixed on wooden substructures, between tile and rafter. Its application is made directly on the substructure, without the need for pre-drilling.
Inox hex nut, used in conjunction with screws, threaded bars and studs. Walsywa supplies stainless hex nut with thread diameters from 1/4″ to 1″ or M3 to M24.
Inox locknut is used in places that have vibrations. Walsywa supplies this nut with thread diameters from 1/4″ to 1/2″ or M3 to M20.
The Inox Threaded Bars are ideal for suspensions of luminaires, fans, hydraulic piping, cable trays and others, they have a glossy zinc plated surface finish or an oiled polish. Walsywa supplies the threaded bars in both metric and inch diameters.
The Plain Inox Washer is used in conjunction with screws, threaded bars, stud and nuts. Walsywa supplies this washer in metric and inch measurements.
The Inox Lock Washer provides a lock, compensating for loosening caused by material wear.
Walsywa supplies this washer in metric and inch measurements.
Nut used in conjunction with threaded rod in assembly of solar panel structures.
Used in conjunction with rods for mounting the structure on fiber cement, ceramic or trapezoidal tiles with a wooden or metallic substructure and support for aluminum rails for photovoltaic panels.
Screw used in conjunction with the straight support and supports in general, for locking the rails and tilt adjustments of the panels.
Used for fixing support hooks and general fixings between tile and wooden substructures (roof-rafter).
Threaded rod used in the assembly of the structures of the solar panels to be fixed to metallic substructures, between tile and metallic framework.
Threaded rod used in the assembly of the structures of the solar panels to be fixed to wooden substructures, between tile and rafter.
Set consisting of threaded rod, nuts and sealing washer. Used in assembling the structures of the solar panels to be fixed on metallic substructures, between tile and metallic framework. A pre-hole in the sub-frame is required.