WLT EXPANSION ANCHOR BOLT
Product description
The WLT Anchor is a percussion expansion anchor, for its application it is necessary to use the WLT Beater. It is mainly indicated for pipe and gutter suspension applications, Walsywa supplies this anchor in diameters from 1/4″ to 3/4 ″ (Inch), M10 and M12 (Metric).
Technical table
| Select | Código | Descripción | Diámetro de la rosca A pol | Diámetro externo del perno B mm | Longitud de la rosca C mm | Longitud del perno D mm | Carga media tracción (arranque) kgf |
|---|---|---|---|---|---|---|---|
| 470670 | WRS 1/4" | 1/4" | 11 | 12 | 31 | 1725 | |
| 470671 | WRS 5/16" | 5/16" | 12,7 | 14 | 35 | 2395 | |
| 470672 | WRS 3/8" | 3/8" | 14 | 15 | 38 | 3336 | |
| 470673 | WRS 1/2" UNC | 1/2" | 18 | 20 | 52 | 4740 | |
| 470674 | WRS 1/2" WW | 1/2" | 18 | 20 | 52 | 4740 | |
| 470675 | WRS 5/8" | 5/8" | 21,5 | 22 | 62 | 5785 | |
| 470676 | WRS 3/4" | 3/4" | 25 | 31 | 82 | 8160 |
Valores considerados para aplicación en hormigón de 20 MPa. *Cargas obtenidas en pruebas de resistencia 20 MPa. Pruebas realizadas en el Laboratorio Walsywa.
TECHNICAL SPECIFICATIONS
- Nominal measurements in inches from 1/4” to 3/4”;
- Nominal metric measurements M10 and M12
- Supplied with internal thread body and captive tolet;
- Shiny zinc-coated finish;
- Suitable for piping and cable tray suspension applications;
- It is applied with a special beater that does not damage the thread;
- Expansion by percussion.
TECHNICAL TABLE
| Code | Description | Thread diameter | Anchor outer diameter | Thread length | Anchor length | Tensile medium loads (pullout) |
| A | B | C | D | kgf | ||
| in | mm | mm | mm | |||
| 470670 | WRS 1/4" | 1/4" | 11 | 12 | 31 | 1725 |
| 470671 | WRS 5/16" | 5/16" | 12,7 | 14 | 35 | 2395 |
| 470672 | WRS 3/8" | 3/8" | 14 | 15 | 38 | 3336 |
| 470673 | WRS 1/2" UNC | 1/2" | 18 | 20 | 52 | 4740 |
| 470674 | WRS 1/2" WW | 1/2" | 18 | 20 | 52 | 4740 |
| 470675 | WRS 5/8" | 5/8" | 21,5 | 22 | 62 | 5785 |
| 470676 | WRS 3/4" | 3/4" | 25 | 31 | 82 | 8160 |
Values considered for application in 20 MPa concrete.
ASSEMBLY INSTRUCTIONS
Image01: 1 Drill the hole with the indicated diameter and depth;
Image02: 2 Clean it thoroughly with a blower;
Image03: 3 Tap until the face of the anchor lines up with the concrete;
Image04: 4 Proceed with fixing.
Request a quote
WLT EXPANSION ANCHOR BOLT
Base materials
-
Concreto
-
Bloco oco
-
Pedra
-
Drywall
-
Placa cimentícia
-
Painel wall
-
Madeira
-
OSB
-
Aço Estrutural
-
Telha metálica
-
Alumínio
-
Guias e montante
