The CBOLT Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it is re-applicable. Walsywa supplies this anchor with diameters ranging from 6mm to 12mm.
| Code | Description | Nominal diameter | Length | Hole diameter | Minimum hole depth | Wrench | Tensile medium loads (pullout) | Medium loads (shear) | |
| mm | mm | mm | mm | mm | in | kgf | |||
| 470600 | CBOLT 6×30 | 6 | 30 | 6 | 30 | 10 | – | 428 | 670 |
| 470601 | CBOLT 6×40 | 6 | 45 | 6 | 45 | 10 | – | 685 | 706 |
| 470602 | CBOLT 6×75 | 6 | 75 | 6 | 75 | 10 | – | 1498 | 706 |
| 470603 | CBOLT 8×60 | 8 | 60 | 8 | 60 | 13 | 1/2″ | 806 | 1505 |
| 470604 | CBOLT 10×60 | 10 | 60 | 10 | 60 | 17 | 11/16″ | 1255 | 1634 |
| 470605 | CBOLT 10×75 | 10 | 75 | 10 | 75 | 17 | 11/16″ | 1705 | 1762 |
| 470606 | CBOLT 12×75 | 12 | 75 | 12 | 75 | 19 | 3/4″ | 1669 | 2411 |
| 470607 | CBOLT 12×100 | 12 | 100 | 12 | 100 | 19 | 3/4″ | 2725 | 2918 |
| 470608 | CBOLT 12×125 | 12 | 125 | 12 | 125 | 19 | 3/4″ | 4053 | 2918 |
Loads obtained in 30 MPa strength concrete.
Image01: Concrete bolt and cbolt application instructions 1 Drill hole with indicated diameter and depth;
Image02: 2 Clean it thoroughly with a blower;
Image03: 3 Insert the anchor through the part and secure with the maximum torque indicated in the table;
Image04: 4 Make sure the flange of the anchor bolt touches the face of the part.
Concrete
Hollow Block
Rock
Drywall
Cement Board
Wall Panel
Wood
OSB
Structural Steel
Metal Tile
Aluminum
Guides and amounts
