The Fast Bolt Anchor is an interlocking anchor, that is, the locking in concrete is performed by the thread itself, it is also known as a concrete screw and because it can be reapplied. Fast Bolt is ideal for electrical suspensions and piping. Walsywa supplies this anchor with 1/4″ and 3/8″ internal diameters.
| Code | Nominal diameter (in) | Thread (in) | Hole diameter (in) | Hole depth (mm) | Wrench | Traction load (kgf) |
| 470615 | 1/4″ | 1/4″ – UNC | 1/4″ | 45 | 1/2″ – 13mm | 1583 |
| 470616 | 3/8″ | 3/8″ – UNC | 1/4″ | 45 | 1/2″ – 13mm | 1583 |
*Last load. Consider safety factors
Loads obtained in 30 MPa strength concrete.
Image01: Application instructions 1 Drill the hole with the diameter and depth indicated in the table;
Image02: 2 Fit the Fast Bolt into the socket and apply it with an impact wrench;
Image03: 3 Make sure the flange of the anchor bolt touches the concrete;
Image04: 4 Secure the threaded rod.
Concrete
Hollow Block
Rock
Drywall
Cement Board
Wall Panel
Wood
OSB
Structural Steel
Metal Tile
Aluminum
Guides and amounts
