The WQA Chemical Anchor Capsule is an excellent option for fastening high loads with high speed of application. The system consists of a capsule that contains the correct amount of resin for each fixation and a specific stud for this application, which has a chamfer at the end to promote the correct mixing of the capsule components.
Image01: Qualifications. Solid
Image02: Threaded Rod with Chamfer
Image03: Conventional Hole
Image03: Dry Hole
Image04: Humid Hole
Image05: Underwater Hole
Image06 Reverse Application
Image01: Application Methods 1 Drill hole with indicated diameter and depth;
Image02: 2 Inject air to remove excess powder from the hole;
Image03: 3 Thoroughly clean the hole using a brush. Blow and brush until there is no more dust;
Image04: 4 Insert the capsule with the curved side facing down;
Image05: 5 Introduce the prisoner with the aid of a hammer;
Image06 Wait for the curing time recommended in the table;
Image07 After curing, position the element to be fixed and torque.
| Code | 470270 | 470271 | 470272 | 470273 | 470274 | 470275 | 470276 |
| WQA capsule (nominal measurements) | 5/16″ (M8) | 3/8″ (M10) | 1/2″ (M12) | 5/8″ (M16) | 3/4″ (M20) | 1″ (M24) | 1 1/4″ (M30) |
| WQA Stud (diameter) | 5/16″ | 3/8″ | 1/2″ | 5/8″ | 3/4″ | 1″ | 1 1/4″ |
| Hole diameter | 10 mm | 12 mm | 14 mm | 18 mm | 24 mm | 28 mm | 35 mm |
| Hole depth | 80 mm | 90 mm | 110 mm | 125 mm | 170 mm | 210 mm | 280 mm |
| Concrete thickness | 120 mm | 130 mm | 140 mm | 180 mm | 230 mm | 270 mm | 340 mm |
| Final traction load | 2.771 kgf | 3.597 kgf | 5.276 kgf | 7.327 kgf | 11.324 kgf | 15.132 kgf | 22.049 kgf |
| Installation torque | 10 N.m | 20 N.m | 40 N.m | 80 N.m | 120 N.m | 180 N.m | 300 N.m |
| Base material temperature | Dry base | Humid base |
| 5 °C | 150 min | 300 min |
| 10 °C | 120 min | 240 min |
| 20 °C | 45 min | 90 min |
| 30 °C | 20 min | 40 min |
| 40 °C | 10 min | 20 min |
Concrete
Hollow Block
Rock
Drywall
Cement Board
Wall Panel
Wood
OSB
Structural Steel
Metal Tile
Aluminum
Guides and amounts
