WQA CHEMICAL ANCHOR RESIN CAPSULE

• Nominal measurements from 5/16” to 1”;
• Applied together with WQA stud with hexagon socket;
• WQA stud offered with adapter;
• It has high tensile strength and is suitable for dynamic loads;
• Does not create tension in the base and allows smaller spaces between anchor bolts;
• Applicable in wet and underwater holes (fresh water).

• Metallic structures;
• Metal consoles;
• Rails and overhead cranes;
• Support for pipelines.

Image01: Qualifications. Solid

Image02: Threaded Rod with Chamfer

Image03: Conventional Hole

Image03: Dry Hole

Image04: Humid Hole

Image05: Underwater Hole

Image06 Reverse Application

Image01: Application Methods 1 Drill hole with indicated diameter and depth;

Image02: 2 Inject air to remove excess powder from the hole;

Image03: 3 Thoroughly clean the hole using a brush. Blow and brush until there is no more dust;

Image04: 4 Insert the capsule with the curved side facing down;

Image05: 5 Introduce the prisoner with the aid of a hammer;

Image06 Wait for the curing time recommended in the table;

Image07 After curing, position the element to be fixed and torque.

• Clean the hole correctly as explained above;
• Use stud with chamfer. The use of the WQA Stud is recommended;
• Any questions, please contact the technical department on 0800 105024.